25 Sept 2010
I finally have my Garmin working perfectly on my phone now. Here are the steps:
Installation:
1) Download Garmin Mobile XT for SymbianS60 version 5.00.50 from
http://www8.garmin.com/software/GarminMobileXTforSymbianS603rdEdition_50050.exe
2) Connect your phone to PC via Mass Storage Mode through a USB cable
3) Copy the entire Garmin and other folders to the root directory of your memory card
4) Unplug the cable, search for the .sis file that you have just copied into your phone
5) click on the .sis file to start installation
Unlocking the device
1) go to GmobileXt on the phone
2) Go to main menu --> setting --> about. If you are unable to directly go into the menu, but prompted with a screen to enter the key and etc, choose "Connect to GPS device"
3) On the About screen, find the Card Id titled "Unlock ESN" and exit the application.
4) Record this ID, extract the keygen (garmin_kgen.exe) and run it on you PC. Enter the Card ID and press generate toget the device unlock code for your card.
Installation:
1) Download Garmin Mobile XT for SymbianS60 version 5.00.50 from
http://www8.garmin.com/software/GarminMobileXTforSymbianS603rdEdition_50050.exe
2) Connect your phone to PC via Mass Storage Mode through a USB cable
3) Copy the entire Garmin and other folders to the root directory of your memory card
4) Unplug the cable, search for the .sis file that you have just copied into your phone
5) click on the .sis file to start installation
Unlocking the device
1) go to GmobileXt on the phone
2) Go to main menu --> setting --> about. If you are unable to directly go into the menu, but prompted with a screen to enter the key and etc, choose "Connect to GPS device"
3) On the About screen, find the Card Id titled "Unlock ESN" and exit the application.
4) Record this ID, extract the keygen (garmin_kgen.exe) and run it on you PC. Enter the Card ID and press generate toget the device unlock code for your card.
Download keygen here:
http://www.ziddu.com/download/6171292/GarminKeygenv1.5.rar.html
http://www.ziddu.com/download/6171292/GarminKeygenv1.5.rar.html
5) Copy the unlock code to notepad and save as sw.unl
6) Place this file in the root directory of the Garmin folder.
7) Run the application and now you should be able to skip being asked to enter the license key.
How to use A-GPS
1) Go to phone main menu --> tools --> setting --> general --> positioning
2) In positioning method, check Assisted GPS, Integrated GPS, and Network Base
3) In positioning server, set server address as supl.nokia.com
4) If you already have an internet setup, choose the appropriate access point. If you do not have one, setup an internet access. For DIGI, go to *128*6*4*3# and press dial button. You will receive the setup promptly. Open the configuration message, Options and then save. Now you can set the access point as Digi Internet.
I think it worths me to spend 10 cents for the inital locking. At least I do not have to wait for 30 min to get the satelite signal.
No comments:
Post a Comment